Grüne Post

[Adler]

Hello,
I started the construction of a German glider Grüne Post. The model is from the kit Hexe Model. I have done partly fuselage. Construction of a model is pleasant and goes quickly.
Petr

[Adler]

Greetings,
continuing with the construction of a German glider Grüne Post. I work on the fuselage of the glider.
The cover is 0.6 mm plywood.

[Adler]

Hello,
I also made some progress in construction. I finished rudder. I shaded it before coating. Little did I suggested interior.
Petr

[Tatodesign]

Hi Petr,
congratulations, neat work!
I will follow you with interest, I have too the HEXE short kit
and I will start it as soon as I finish the painting of a big ME 262 for a friend

[Adler]

Hello,
Thank you. Construction of a model is quick and easy. You will be satisfied. In two days I have almost finished wings. I will now be coated plywood 0.6.
Petr

[Adler]

Greetings
I continue building Grüne. I finished fuselage. The cover will be Solartex.
Fuselage, I modified a bit.
Petr

[Christian]

Christian

[RichardP]

nice building

[Adler]

Hallo,
Today we are in our at the airport for the first time flying the new gliders. Grüne Post and Krajánek. Everything managed to. Two towing flying constantly. Nice weather.
Here are the photos.
http://rcmpilot.rajce.idnes.cz/Aerovleky_4.6.2015/

Petr

[Johannes]

H Petr,
die Holzoberfläche sieht super aus

Johannes

[Erix]

Ahoj Petře,

Krásné probarvení, vyniká konstrukce. No je poznat PAN maketář. Ať ti slouží.

P.S. Ta dvouocasá/dvousměrovková vlečná je móóóóc hezká. Kdo je prosím majitel/stavitel.

Erix

[Adler]

Ahoj Eriku,
poslal jsem Ti mail. Děkuji,snažil jsem se. Líbí se mi ta velikost.Třímetrovka,celkově robustní ale skladné do auta.
Petr

[CHAUSSEBOURG]

Very good pictures . The Zlin 24 does not look very different from my Castel 3010.
Pierre

[LV]

[Tatodesign]

[Adler]

Hello Stefano,

On covering of the wing I used balsa. The wings are colored. I gliders fuselage covered with plywood.

Petr

[Johannes]

Sehr schön geworden Petr

Ich wünsche Deiner Post und Dir immer gute Flüge und noch bessere Landungen

Johannes

[Tatodesign]

[Adler]

Hi Stefano,
Thank you. On Wasserkuppe unfortunately I will not. I missed to log on time.
I have a nice flying, and weather.

Petr

[carlominimoa]

Hello, I'm just approaching the wings and I don't understand the first three root ribs how they do the dihedral...is there any diehedral in this model?
Because from the three view I don't see any!!
Please Help me to understand also with some photos.
Tnx
Carlo

[Adler]

HELLO,
I dihedral wings by kits. It's a bit more than it should be. The model is more stable in flight. The wings are fiberglass rods. Dihedral is made in root ribs

http://www.hexemodel.cz/Grune_Post/Building%20guide%20-%20Grune%20Post%20-%20wing.pdf

Petr

[RichardP]