RETROPLANE.net Index du Forum
FAQ - Charte - Rechercher - Fichiers - Membres - S'enregistrer - Annuaire - Vérifier ses messages privés - Connexion

Nemere scale 1/6
Aller à la page Précédente
1, 2, 3, 4 Suivante

 
Poster un nouveau sujet   Répondre au sujet    RETROPLANE.net Index du Forum -> Constructions Détaillées en Photo
Voir le sujet précédent :: Voir le sujet suivant  
Auteur Message
Anonyme
Serial Posteur
Serial Posteur


Inscrit le: 26 Jan 2006
blank.gif


MessagePosté le: 28/12/2015 09:20    Sujet du message: Répondre en citant

Nice plywood working ! Wink [clap]
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
DOMINIQUE DIOT
Incurable Posteur
Incurable Posteur


Inscrit le: 03 Nov 2013
france.gif

Localisation: Somme
Âge: 70 Vierge

MessagePosté le: 28/12/2015 09:46    Sujet du message: Répondre en citant

[clap] [clap] [good] nickel


Lorsque on est encore en l'air, c'est qu'il est encore entier.
Dominique
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
GARCIA
Psycho Posteur
Psycho Posteur


Inscrit le: 25 Juil 2010
france.gif

Localisation: COTE D'OR
Âge: 65 Capricorne

MessagePosté le: 28/12/2015 14:07    Sujet du message: Répondre en citant

C'est beau [good]


José
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail Visiter le site web de l'utilisateur
Andreas Brunner
Apprenti Posteur
Apprenti Posteur


Inscrit le: 08 Déc 2014
austria.gif

Localisation: 7201 Neudörfl a d Leitha
Âge: 60 Bélier

MessagePosté le: 29/12/2015 18:32    Sujet du message: Répondre en citant

[good] nice,nice,nice [bave]

[clap] [clap] [clap]
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
LEROY
Maniaco Posteur
Maniaco Posteur


Inscrit le: 21 Juil 2011
france.gif

Localisation: Maurepas 78
Âge: 71 Lion

MessagePosté le: 30/12/2015 11:33    Sujet du message: Répondre en citant

I watch with interest your building is full of tricks , and the choice for Nemere amazing !! [clap] [clap] [clap]

Michel.L



Ceux qui s'avancent trop précipitamment reculeront encore plus vite
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
caralp_laurent
Psycho Posteur
Psycho Posteur


Inscrit le: 30 Jan 2006
france.gif

Localisation: La Houssaye en Brie 77
Âge: 51 Gémeau

MessagePosté le: 30/12/2015 23:30    Sujet du message: Répondre en citant

Great ! [amen] [amen] [amen]

Lolo



Lolométéo, rétro addict ;o)

"On commence à vieillir quand on remplace ses rêves par des regrets"
Sénèque
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
bocorvin
Maniaco Posteur
Maniaco Posteur


Inscrit le: 17 Aoû 2015
netherlands.gif

Localisation: Hillegom
Âge: 77 Vierge

MessagePosté le: 31/12/2015 10:57    Sujet du message: Répondre en citant

Thanks for all the nice comments!
Merci a tous! Very Happy

amicalement, Vincent
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
Miguel Gil
Apprenti Posteur
Apprenti Posteur


Inscrit le: 13 Oct 2008
spain.gif

Localisation: Madrid
Âge: 67 Taureau

MessagePosté le: 01/01/2016 20:31    Sujet du message: Répondre en citant

Un travail très joli [clap] [clap] [clap]
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
bocorvin
Maniaco Posteur
Maniaco Posteur


Inscrit le: 17 Aoû 2015
netherlands.gif

Localisation: Hillegom
Âge: 77 Vierge

MessagePosté le: 04/01/2016 20:50    Sujet du message: Répondre en citant

Merci pour votre commentaire, Miguel!

Je continue en Anglais, first I did some detailing on the wings; in the original Nemere the ailerons were actuated with wires and pully's (see the description of the "Nemere 1936"of Eric Spore on this forum). I made only a non functional pully

and put it in the wing

. Onother 4 small pully's wil come close to the ailerons, but they can't be fitted at this stage.

When the wing is covered with Oratex they are noticeble, surely against the light.
Next I went on with the canopy, put a ply strip over the middle of the frames

added partial frames

The balsa piece on top is temporary to get the girder in the correct shape. I added stringers on both sides and put 2 mm X 2 mm spruce pieces between the frames. Later I glued another ply strip on the bottom to get a rigid structure.









I checked the canopy on the fuselage



To my great relief it all fitted.

I went on with the fuselage, started with the coupling.

For safety I soldered some brass on the inside of the fuselage and glued it too with thin cyano. I made a jig for the push-pull rod of iron wire

and bended a 1 mm steel wire .

after hooking it in I could just straighten it.

Just behind the coupling servo fits the 4 cell reciever pack.

with velcro on the bottom. The receivers fits behind the backrest which is removable

I puzzled a whole day to get the seat together









The seat itself is locked with a not visible magnet.
The on- off switch is just behind the backrest on the left side.

To be continued, Vincent.


Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
DOMINIQUE DIOT
Incurable Posteur
Incurable Posteur


Inscrit le: 03 Nov 2013
france.gif

Localisation: Somme
Âge: 70 Vierge

MessagePosté le: 05/01/2016 08:22    Sujet du message: Répondre en citant

nickel bravo [good]


Lorsque on est encore en l'air, c'est qu'il est encore entier.
Dominique
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
CHAUSSEBOURG
Maniaco Posteur
Maniaco Posteur


Inscrit le: 22 Sep 2010
france.gif

Localisation: Touraine
Âge: 85 Taureau

MessagePosté le: 05/01/2016 14:36    Sujet du message: Répondre en citant

Beautiful work! Congratulations,
Pierre



Lorsqu'on est toujours en l'air, c'est qu'on n'est pas encore posé.
Johannes Walkowiak
LDC
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
bocorvin
Maniaco Posteur
Maniaco Posteur


Inscrit le: 17 Aoû 2015
netherlands.gif

Localisation: Hillegom
Âge: 77 Vierge

MessagePosté le: 12/01/2016 14:24    Sujet du message: Répondre en citant

Merci Dominique et Pierre pour votre commentaire!

Je continue en Anglais;
I laminated 4 layers of 4mm balsa to make the landing skid, covered it with Oratex and painted it grey. I prepositioned it with two pins with the heads snipped off.



Later I glued two 8 mm X 2 mm spruce battens on top.
After some detailing on the wings they were ready for couloring, covering with Oratex and varnishing. That was difficult, the materials used on the forum aren't sold over here, so I needed onother solution. My wife came up with Bister (dutch name) and obtaineble in art shops, which is brown, water soluable and can also be washed out. I tried a lot of different concentrations on scrap ply and choose to use a rather light colour.


Same with the Oratex colour, the yellowish one or the neutral??? I choose the neutral.

.


I put two layers of cellulose with (porenfuller in German) and one layer boatvarnish.
Put on the ailerons (you can just see the bent end of the steelwire on which it hinges)

glued the actuation segments and push/pull rods.





.
Made a fairing on the verical stabilizer

and a locking mechanism for the tailplane.






Figured out how much lead should go in the nose to get the correct CG.

I use this stuff, pour in about 20mml slow curing epoxy and pour in the "liquid lead"





The pull/ pull wires on the verical tailplane

The tailplane needs still to be sprayed in the colours of the Hungarian flag.. and the ply looks pale, but the colour is the same as the interior in the previous picture!. Made some shots of the plane , couldn't do it outside, raining and stormy and the colour of the floor is a bit distracting.





After the detailig of the canopy I glue the "glass" on Very Happy .





checked if the spoilers worked OK





a suivre,

Vincent


Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
VincentB
Serial Posteur
Serial Posteur


Inscrit le: 23 Jan 2006
world.gif

Localisation: En la playa, bajo el sol
Âge: 60 Scorpion

MessagePosté le: 12/01/2016 15:15    Sujet du message: Répondre en citant

Bravo Vincent, très belle finition [clap]
Je viens d'aller voir le plomb en bille chez eileensemporium.com c'est bien comme matériaux [good] et c'est plus pratique et moins dangereux que d'ouvrir des cartouches de chasse Laughing



Retroplane et modélisme en pause, vanlife à haute dose.
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Visiter le site web de l'utilisateur
DOMINIQUE DIOT
Incurable Posteur
Incurable Posteur


Inscrit le: 03 Nov 2013
france.gif

Localisation: Somme
Âge: 70 Vierge

MessagePosté le: 12/01/2016 15:41    Sujet du message: Répondre en citant

bravo,tres tres beau [clap] [clap]


Lorsque on est encore en l'air, c'est qu'il est encore entier.
Dominique
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
DELRIEUPierre
Psycho Posteur
Psycho Posteur


Inscrit le: 28 Jan 2006
france.gif

Localisation: Arvert 17530
Âge: 74 Poissons

MessagePosté le: 12/01/2016 16:26    Sujet du message: Répondre en citant

[good2] Joli ce Nemere [clap] avec sa belle finition [clap]
Pierre





Vieilles toiles à Peyresourde et Papy's Flying Club 17 à la Madeleine
Signé les copains
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail Visiter le site web de l'utilisateur
bocorvin
Maniaco Posteur
Maniaco Posteur


Inscrit le: 17 Aoû 2015
netherlands.gif

Localisation: Hillegom
Âge: 77 Vierge

MessagePosté le: 12/01/2016 17:20    Sujet du message: Répondre en citant

Merci Vincent,Dominique et Pierre pour les encouragements!
Quelque chose de "liquid lead" (en Anglais)
I took about 20 ml slow curing epoxy for 300 grams liquid lead. First I put in 10 ml epoxy in the nose with a syringe (keeping the fuselage verically of course) then pouring in the lead, tapping and poking a bit, just like pouring concrete. Then I put the remaining epoxy over it.
It gives a very strong result, this is a picture of my crashed Nemere (1:8 ) the nose is still intact. I tried to fracture it with a chisel and a hammer, but its very strong. Don't use PVA (white glue) it doesn't harden very well and can expand.





You can see the mark of the chisel in the lead/epoxy.

Vincent.
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
caralp_laurent
Psycho Posteur
Psycho Posteur


Inscrit le: 30 Jan 2006
france.gif

Localisation: La Houssaye en Brie 77
Âge: 51 Gémeau

MessagePosté le: 14/01/2016 16:48    Sujet du message: Répondre en citant

Salut Vincent,
Bravo, il est magnifique ton planeur [amen] [amen] [amen]

Lolo



Lolométéo, rétro addict ;o)

"On commence à vieillir quand on remplace ses rêves par des regrets"
Sénèque
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
GARCIA
Psycho Posteur
Psycho Posteur


Inscrit le: 25 Juil 2010
france.gif

Localisation: COTE D'OR
Âge: 65 Capricorne

MessagePosté le: 14/01/2016 20:09    Sujet du message: Répondre en citant

[whooo] [amen] [amen] [amen] il est superbe.


José
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail Visiter le site web de l'utilisateur
bocorvin
Maniaco Posteur
Maniaco Posteur


Inscrit le: 17 Aoû 2015
netherlands.gif

Localisation: Hillegom
Âge: 77 Vierge

MessagePosté le: 15/01/2016 00:16    Sujet du message: Répondre en citant

Merci beaucoup Lolo et Jose pour votre commentaires jolie!
It is very encouraging Very Happy

Vincent.
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
Christian
Serial Posteur
Serial Posteur


Inscrit le: 02 Mai 2006
france.gif

Localisation: Europe
Âge: 61 Verseau

MessagePosté le: 15/01/2016 23:57    Sujet du message: Répondre en citant

Quel beau planeur , magnifique finition j'adore [clap] [clap] [clap] [clap]

Christian






Orlik en construction
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
Clifton
Psycho Posteur
Psycho Posteur


Inscrit le: 06 Mai 2014
france.gif

Localisation: Anjou
Âge: 61 Capricorne

MessagePosté le: 16/01/2016 12:43    Sujet du message: Répondre en citant

Very beautiful work. Nice idea the liquid lead.


Slingsby Petrel, à mon gout le plus beau de tous, quoi que le Fafnir ... Ah ces ailes en mouette, un jour ....

Rien de ce qui est fini n'est jamais achevé tant que tout ce qui est commencé n'est pas totalement terminé (Pierre Dac)
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
bocorvin
Maniaco Posteur
Maniaco Posteur


Inscrit le: 17 Aoû 2015
netherlands.gif

Localisation: Hillegom
Âge: 77 Vierge

MessagePosté le: 24/01/2016 17:45    Sujet du message: Répondre en citant

Merci Christian et Clfton pour les jolie comments Very Happy
Je continue en Anglais, les detail du cockpit.
I ordered a set of instruments at aerocockpit, its a nice start for the instrument panel. The kit contains a photo of the dial, plastic rings in the correct diameter and bezels (additionel rings)

and some other stuff, a picture of instruments and some pages of the Askania catalogue from 1937/1938 which I found on the net.





The instruments are a bit basic, its only a front, so I had to add some depht to the instruments, they are very visible.



I also made the thermosbottle for the variometer. I made all the parts out of a handle of a paintbrush (still using the brush Very Happy )

and using my just obtained lathe.


I cut short pieces of 0.45 mm hardbrass from Alan Gibson (UK) in the back of the instruments to attach the tubing. Made also T pieces.



For the tubing itself I use silicon isolation from electrowire












Next I glued the canopy with canopy glue on the frame and cut the two elliptical holes in the sides, and then cut the rear spacer out.




In the fuselage there is a handle to drop the dolly which, in the model, is connected with the on/off receiver switch. At the left side behind the shoulder of the pilot a small handle to put both ailerons up or down

I think you can just spot that on the photo, just as the thermosbottle for the vario.
Another very visible part is the venturi which drives the turn indicator.
It was a challenge on my lathe, Adri turned a piece of solid aluminium out of a old doorhandle and I turned the venturi.





From some scrap brass I bent a strap to attach the venturi at the canopy.











There is still not a pilot, it will be there before Polsa!
Up to the decals, My friend Adri can cut them with a digital cutting machine and he just enlarged the files he had from my 1/8 scale Nemere by 33%. When he had cut them we both noticed that the olympic rings on the original (see photo) are much thinner than the olympic rings used nowadays.


From the photo we thought the rings are about 1/14 or 1/15 of the diameter. Adri also found at that the rings were different positioned, I hope it gives a nice image of the time.


On a day which wasn't overcast, raining or storming I put the Nemere together and made some shots (still missing the pilot [non]










Its nearing its completion, still missing some details in the cockpit and the pilot itself!

Vincent.


Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
henning jung
Apprenti Posteur
Apprenti Posteur


Inscrit le: 16 Juil 2011
germany.gif


Âge: 51 Taureau

MessagePosté le: 24/01/2016 17:56    Sujet du message: Répondre en citant

hallo,

wunderschöner Flieger und das in dem Maßstab [amen] [amen]

Gruß Henning
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
VincentB
Serial Posteur
Serial Posteur


Inscrit le: 23 Jan 2006
world.gif

Localisation: En la playa, bajo el sol
Âge: 60 Scorpion

MessagePosté le: 24/01/2016 18:06    Sujet du message: Répondre en citant

Bravo Vincent, superbes détails, d'autant plus minutieux à faire sur un modèle au 1/6 que sur un plus grand [clap]


Retroplane et modélisme en pause, vanlife à haute dose.
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Visiter le site web de l'utilisateur
LEROY
Maniaco Posteur
Maniaco Posteur


Inscrit le: 21 Juil 2011
france.gif

Localisation: Maurepas 78
Âge: 71 Lion

MessagePosté le: 24/01/2016 18:18    Sujet du message: Répondre en citant

Fantastique !! [clap] [clap] [baaave]
What is your camera ?

Michel.L



Ceux qui s'avancent trop précipitamment reculeront encore plus vite
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
Sed
Maniaco Posteur
Maniaco Posteur


Inscrit le: 13 Mai 2015
france.gif

Localisation: Villeurbanne
Âge: 57 Taureau

MessagePosté le: 24/01/2016 19:31    Sujet du message: Répondre en citant

Somptueux tous ces détails [amen] [amen] [amen] !


Serge
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
bocorvin
Maniaco Posteur
Maniaco Posteur


Inscrit le: 17 Aoû 2015
netherlands.gif

Localisation: Hillegom
Âge: 77 Vierge

MessagePosté le: 24/01/2016 20:11    Sujet du message: Répondre en citant

Merci Sed, Dominique, Leroy et Vincent pour des jolie commentaires!
Danke Henning fur ihr schone commentar!
Mon camera est une Canon sx600HS, c'est une camera compacte , avec
une optique 18X zoom et position macro, aussi possible dans le position tele.

Vincent
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
caralp_laurent
Psycho Posteur
Psycho Posteur


Inscrit le: 30 Jan 2006
france.gif

Localisation: La Houssaye en Brie 77
Âge: 51 Gémeau

MessagePosté le: 24/01/2016 21:25    Sujet du message: Répondre en citant

Bravo Vincent,
Il est magnifique ! [amen] [amen] [amen]

Lolo



Lolométéo, rétro addict ;o)

"On commence à vieillir quand on remplace ses rêves par des regrets"
Sénèque
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
Greg
Accro Posteur
Accro Posteur


Inscrit le: 29 Nov 2014
france.gif

Localisation: Contes
Âge: 81 Taureau

MessagePosté le: 24/01/2016 23:51    Sujet du message: Répondre en citant

Very Happy génial ! belle leçon de technologie modéliste ! [clap]


Le vent se lève .....
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
sebastian92
Serial Posteur
Serial Posteur


Inscrit le: 01 Sep 2015
france.gif

Localisation: Hauts de seine
Âge: 60 Scorpion

MessagePosté le: 24/01/2016 23:56    Sujet du message: Répondre en citant

très belle réalisation pleine de supers détails !! [clap]
It's going to fly this year now Very Happy



Pourvu que ça vole, roule, flotte ! normalement j'ai tout bien fait pour…
Un bel avion est un avion qui vole bien ! Marcel Dassault
…………
Sebastian

Vends module émission 2.4 ghz pour Futaba, Hitec TZ-FM + 2 récepteurs corona 8 voies (contact en MP)
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
Montrer les messages depuis:   
Poster un nouveau sujet   Répondre au sujet    RETROPLANE.net Index du Forum -> Constructions Détaillées en Photo Toutes les heures sont au format GMT + 1 Heure
Aller à la page Précédente
1, 2, 3, 4 Suivante
Page 2 sur 4

 
Sauter vers:  
Vous ne pouvez pas poster de nouveaux sujets dans ce forum
Vous ne pouvez pas répondre aux sujets dans ce forum
Vous ne pouvez pas éditer vos messages dans ce forum
Vous ne pouvez pas supprimer vos messages dans ce forum
Vous ne pouvez pas voter dans les sondages de ce forum
Vous ne pouvez pas joindre des fichiers
Vous pouvez télécharger des fichiers

Zone de Téléchargement du Forum et Site Retroplane


Images aléatoires album Retroplane, clic pour Agrandir

Forum en Flux RSS