RETROPLANE.net Index du Forum
FAQ - Charte - Rechercher - Fichiers - Membres - S'enregistrer - Annuaire - Vérifier ses messages privés - Connexion

Fokker FG-2 - Congrès 2017 Vauville
Aller à la page Précédente
1, 2, 3, 4, 5, 6, 7, 8 Suivante

 
Poster un nouveau sujet   Répondre au sujet    RETROPLANE.net Index du Forum -> Constructions Métalliques - Stahlrohrkonstruktion
Voir le sujet précédent :: Voir le sujet suivant  
Auteur Message
bocorvin
Maniaco Posteur
Maniaco Posteur


Inscrit le: 17 Aoû 2015
netherlands.gif

Localisation: Hillegom
Âge: 77 Vierge

MessagePosté le: 07/12/2016 15:15    Sujet du message: Répondre en citant

Bonjour a tous,

Today I made the internal rigging of the tailboom. On the website of Paolo Severin is a method described to make the inetrnal rigging, which is very usefull. When I visited the Aviodrome I could see how Fokker does this on his "Spin", his first aircraft,


He made his own "bushes, tubes?" from wire and I tried to do the same.
I wrapped 0.5 steel wire around a core of 1mm steel in a drill.







cut it in short "bushes"







Put it under tension when I put it through the other hole..

fold it around and put the bush on it


Sometimes it was hard to reach....




The tailboom became incrideble stiff, I hope not to stiff, when I touch a wire accidentally it sounds like a guitar Confused



some detail;


to be continued,

Vincent.
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
Johannes
Serial Posteur
Serial Posteur


Inscrit le: 23 Juil 2007
germany.gif

Localisation: Leichlingen
Âge: 64 Sagittaire

MessagePosté le: 07/12/2016 22:08    Sujet du message: Répondre en citant

Hi Vincent,.
einfach genial wie Du baust - Spitze [clap] [clap]

LG Johannes
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
bocorvin
Maniaco Posteur
Maniaco Posteur


Inscrit le: 17 Aoû 2015
netherlands.gif

Localisation: Hillegom
Âge: 77 Vierge

MessagePosté le: 15/12/2016 15:46    Sujet du message: Répondre en citant

Merci Johannes for the nice comments!
I tried to put all the rc components out of sight under the seats and more or less demountable. Without ;

and with the rc components/ seat supporting structure






The steering stick and rudder pedals ready for mounting;

The springs are only to keep the wires straight, its all not functional Sad



The backrest of the seats covered with diacov and painted with humbrol

The cushion was made from 3mm balsa covered with leather from an old purse (nice thin leather)


and temporarely in place


Now I have to make a pilot and a passenger and then I can make the harnesses.
To be continued,

Vincent
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
sebastian92
Serial Posteur
Serial Posteur


Inscrit le: 01 Sep 2015
france.gif

Localisation: Hauts de seine
Âge: 60 Scorpion

MessagePosté le: 15/12/2016 16:42    Sujet du message: Répondre en citant

You sacrificed a purse ! I hope that you hidden a coin under the seat as carries happiness as hold traditions Laughing
Toujours aussi astucieux et mécanique comme réalisation [clap]



Pourvu que ça vole, roule, flotte ! normalement j'ai tout bien fait pour…
Un bel avion est un avion qui vole bien ! Marcel Dassault
…………
Sebastian

Vends module émission 2.4 ghz pour Futaba, Hitec TZ-FM + 2 récepteurs corona 8 voies (contact en MP)
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
de Schaetzen Harold
Maniaco Posteur
Maniaco Posteur


Inscrit le: 06 Avr 2006
belgium.gif

Localisation: Schilde
Âge: 78 Verseau

MessagePosté le: 16/12/2016 09:31    Sujet du message: Répondre en citant

Dear Vincent,

You have steel nerves!

Good continuation.
Harold
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
bocorvin
Maniaco Posteur
Maniaco Posteur


Inscrit le: 17 Aoû 2015
netherlands.gif

Localisation: Hillegom
Âge: 77 Vierge

MessagePosté le: 05/01/2017 13:32    Sujet du message: Répondre en citant

Hello everyone,

First, thankyou Sebastian and Harold for your comments! It took some time because I had a bike accident followed by influenza, it took some time!

I went on putting the grabrails?? and wingskids at the wings. I tried to avoid Philips screws, so I used M2 bolts and nuts


A small pin went through the skid at the front end to avoid rotation, I hope its flexible enough not to break.




The grabrails are fastened with a M3 bolt through the maingirder in the front and a screw at the rear.


In the meantime I worried myself how to transport the whole lot.
There are 8 cables per side and kinks (coudes?) are a real danger. It is just a sailingboat with the mast lowered. So after lots of thinking I came up with some "helpthings"

Spruce 8 X 4 mm with pins and rubberbands do the trick, I hope.

Flexible rigging cables, flexible steering cables and rigid rigging, hopefully it will make some noise when flying Very Happy


With some luck the tailplanes fitted on top


The remaining vertical tailplanes go with the wings.

All the small parts well protected!
Its almost ready, I am working on the pilot and passenger , the anemometer is only just on the drawing board!

to be continued,

Vincent
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
Mad Doc
Accro Posteur
Accro Posteur


Inscrit le: 08 Juil 2014
germany.gif

Localisation: Wuppertal, Deutschland
Âge: 47 Scorpion

MessagePosté le: 05/01/2017 14:16    Sujet du message: Répondre en citant

[clap] [clap] [clap]
Absolut Grossartig!!!
Sieht so aus als wäre der Erstflug nicht mehr weit entfernt!
Ich bin ein bisschen froh das ich die Fokker nicht auch baue, so wie ich es mal vor hatte. Wahrscheinlich hätte ich meine dann schon fünf mal verschrottet....
Auch wenn ich nicht in Vauville dabei sein kann, ich würde sie echt gerne mal fliegen sehen...

Liebe Grüße,

Christian
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
bocorvin
Maniaco Posteur
Maniaco Posteur


Inscrit le: 17 Aoû 2015
netherlands.gif

Localisation: Hillegom
Âge: 77 Vierge

MessagePosté le: 05/01/2017 15:43    Sujet du message: Répondre en citant

Hello Christian,

Danke!! und Ich hoffe naturlich es einmal for zu fliegen!
Aber Ich erinnere mich deine worte; jedes mal das man das Flugzeug start, bist mann nicht sicher das es unbeschadigt bleibt Confused

Liebe Grüße,

Vincent
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
bocorvin
Maniaco Posteur
Maniaco Posteur


Inscrit le: 17 Aoû 2015
netherlands.gif

Localisation: Hillegom
Âge: 77 Vierge

MessagePosté le: 21/01/2017 12:36    Sujet du message: Répondre en citant

Hello everyone,

I started with the pilot figures, got a drawing and scaled it down to 1: 5, glued it on card to make templates

, cut them out in 10 mm balsa, which I doubled to get more or less the right thickness






For the knees and elbows I used robart 3.5 mm hinges



The hips and shoulders should rotate in all directions, so I made joints with double elastic band.


To get the right amount of freedom in articulation, I rounded the inside of the joints.
You can just see the place where I put a pin (red arrow), it goes through the middle of the big hole, so the elastic band goes round the pin. I use a double bended steel wire to get the elastic cord in place

When the clothing is finished, I will put a knot in it! The pilot was a bit thin, so I glued an extra 5mm balsa on his chest.


To see if they fit I compared it with the real thing:



I also doubled th Diacov on the nacelle, to make it a bit less transparant.


This picture, which I recently found, gives a good idea of the harness he used

The points where the hip belt is attached is just visible

On this photo you can also see how the shoulder belt is positioned. The belt itself is very broad, scaled down I guessed about 14mm. I could get 14mm wide, black elastic band, so that problem was solved. I made the anchoring plates from 0.5 mm aluminium (from a can)

, made a jig from steel plate. A lot of plates, sprayed white.

Bolted with M2 just behind the seats ( the shoulder belts have each one point, not on this photo)

I had to take this unit out again Sad

The buckles and the belts secured with a clip


The pilot and passenger went to my sister Hans who is going to make the clothes (I can't wait!!)
Quite unexpected I started with the heads, made from super sculpey. tI tried to make the pilot look like Anthony Fokker

, I altered him a bit and made the passenger, which looked a bit less optimistic Confused

Both will be wearing caps, so the ears will be covered.
The heads are baked, but not yet painted, next thing to do!

Will be continued,
Vincent
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
Fotor
Stagiaire Posteur
Stagiaire Posteur


Inscrit le: 26 Mar 2010
netherlands.gif


Âge: 48 Gémeau

MessagePosté le: 21/01/2017 12:41    Sujet du message: Répondre en citant

Amazing how you make everything yourself [clap]
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
Philippe26
Psycho Posteur
Psycho Posteur


Inscrit le: 10 Fév 2015
france.gif

Localisation: Allan près de Montélimar
Âge: 70 Sagittaire

MessagePosté le: 21/01/2017 12:58    Sujet du message: Répondre en citant

Yes absolutely,
That's the true modelling.... congratulation.
Your two passengers look great !
Philippe



Je ne suis pas vieux, je suis jeune depuis plus longtemps que vous......
I am not old, I am young for longer than you .....
"C'est impossible, dit la Fierté; c'est risqué, dit l'Expérience; c'est sans issue, dit la Raison; mais essayons, murmure le coeur » W.A.Ward
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
DOMINIQUE DIOT
Incurable Posteur
Incurable Posteur


Inscrit le: 03 Nov 2013
france.gif

Localisation: Somme
Âge: 70 Vierge

MessagePosté le: 21/01/2017 13:54    Sujet du message: Répondre en citant

superbe travail [clap] [clap] [amen]


Lorsque on est encore en l'air, c'est qu'il est encore entier.
Dominique
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
michel
Serial Posteur
Serial Posteur


Inscrit le: 04 Mar 2007
france.gif

Localisation: Luchon

MessagePosté le: 21/01/2017 18:03    Sujet du message: Répondre en citant

SUPERBE construction ,et beau pilote [amen]

Michel





Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
bocorvin
Maniaco Posteur
Maniaco Posteur


Inscrit le: 17 Aoû 2015
netherlands.gif

Localisation: Hillegom
Âge: 77 Vierge

MessagePosté le: 23/01/2017 14:35    Sujet du message: Répondre en citant

Bonjour a tous,

Thanks very much Fotor, Philippe, Dominique and Michel for your encouraging comments!

Just when I more or less finished the heads MDR I found a very useful "class" on youtube how to model heads in sculpey clay, worth to take a look at!

https://www.youtube.com/watch?v=BSbSX-rDYLM&t=38s

Vincent
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
RichardP
Accro Posteur
Accro Posteur


Inscrit le: 26 Oct 2012
world.gif

Localisation: ALENCON
Âge: 74 Cancer

MessagePosté le: 23/01/2017 15:05    Sujet du message: Répondre en citant

excellent tuto Very Happy
thank you



Si le problème a une solution, il ne sert à rien de s'inquiéter. Mais s'il n'en a pas, alors s'inquiéter ne change rien.
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
bocorvin
Maniaco Posteur
Maniaco Posteur


Inscrit le: 17 Aoû 2015
netherlands.gif

Localisation: Hillegom
Âge: 77 Vierge

MessagePosté le: 26/01/2017 15:32    Sujet du message: Répondre en citant

Hello everyone,

The FG-2 was only equipped with the Wilhelm Morrell anemometer, very well described by Vincent Becancon in his article about the Mira 3.



Here just visible on the right diagonal strut.
I gave my friend ADRI (who already made the rib templates and all the small ply stuff for the ribs) the plans and asked him if he thought 3D printing was an option. He texted me; just wait!
I had a lucky day! After some time the photo's came in!
So ADRI made this anomemeter completely!!
(I only painted it)



































The dial is the download of the Mira 3







I was very pleased with his great effort!! Very Happy Very Happy
Now I went on,I only had to make the mounting thing and paint it (Humbrol matt grey)










A small video,
https://youtu.be/3INhTQuJVMk
Thank you very much Adri, this was a tricky thing to make!! and I am very pleased with it!!

To be continued,

Vincent


Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
VincentB
Serial Posteur
Serial Posteur


Inscrit le: 23 Jan 2006
world.gif

Localisation: En la playa, bajo el sol
Âge: 60 Scorpion

MessagePosté le: 26/01/2017 16:01    Sujet du message: Répondre en citant

Ca me rappelle des souvenirs. Bravo Vincent, superbe ton anemo WM [amen]


Retroplane et modélisme en pause, vanlife à haute dose.
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Visiter le site web de l'utilisateur
CHAUSSEBOURG
Maniaco Posteur
Maniaco Posteur


Inscrit le: 22 Sep 2010
france.gif

Localisation: Touraine
Âge: 85 Taureau

MessagePosté le: 26/01/2017 17:00    Sujet du message: Répondre en citant

Beautiful work!
Pierre



Lorsqu'on est toujours en l'air, c'est qu'on n'est pas encore posé.
Johannes Walkowiak
LDC
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
Philippe26
Psycho Posteur
Psycho Posteur


Inscrit le: 10 Fév 2015
france.gif

Localisation: Allan près de Montélimar
Âge: 70 Sagittaire

MessagePosté le: 26/01/2017 17:03    Sujet du message: Répondre en citant

[baaave] Hurray for Adri !!!
What a perfect job ! [amen]
I wonder if it works really MDR
O.K. I'm out !!!
Philippe



Je ne suis pas vieux, je suis jeune depuis plus longtemps que vous......
I am not old, I am young for longer than you .....
"C'est impossible, dit la Fierté; c'est risqué, dit l'Expérience; c'est sans issue, dit la Raison; mais essayons, murmure le coeur » W.A.Ward
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
DOMINIQUE DIOT
Incurable Posteur
Incurable Posteur


Inscrit le: 03 Nov 2013
france.gif

Localisation: Somme
Âge: 70 Vierge

MessagePosté le: 26/01/2017 17:36    Sujet du message: Répondre en citant

superbe travail,bravo [clap] [amen]


Lorsque on est encore en l'air, c'est qu'il est encore entier.
Dominique
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
michel
Serial Posteur
Serial Posteur


Inscrit le: 04 Mar 2007
france.gif

Localisation: Luchon

MessagePosté le: 26/01/2017 18:09    Sujet du message: Répondre en citant

Moi aussi ça me rappelle des souvenirs ,surtout pour la fabrication des godets
[argh] , [clap] [clap] Vincent il est magnifique [amen]

Michel





Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
bocorvin
Maniaco Posteur
Maniaco Posteur


Inscrit le: 17 Aoû 2015
netherlands.gif

Localisation: Hillegom
Âge: 77 Vierge

MessagePosté le: 26/01/2017 18:22    Sujet du message: Répondre en citant

Thank you all for the comments, I'll pass them on to Adri, he did this difficult and complicated job in a very creative way![clap] [clap] [clap]

Vincent


Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
de Schaetzen Harold
Maniaco Posteur
Maniaco Posteur


Inscrit le: 06 Avr 2006
belgium.gif

Localisation: Schilde
Âge: 78 Verseau

MessagePosté le: 27/01/2017 09:05    Sujet du message: Répondre en citant

Beste Vincent,

Prachtig, indrrukwekkend. En wat een geduld!!!
Ik heb geen woorden om mij uit te drukken.

Bonne continuation.
Harold
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
bocorvin
Maniaco Posteur
Maniaco Posteur


Inscrit le: 17 Aoû 2015
netherlands.gif

Localisation: Hillegom
Âge: 77 Vierge

MessagePosté le: 27/01/2017 12:07    Sujet du message: Répondre en citant

Beste Harold,

Bedankt voor je mooie woorden, ik geef ze aan Adri door, want hij heeft dit zo creatief en goed gedaan!

Groet,
Vincent
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
Sed
Maniaco Posteur
Maniaco Posteur


Inscrit le: 13 Mai 2015
france.gif

Localisation: Villeurbanne
Âge: 57 Taureau

MessagePosté le: 27/01/2017 19:15    Sujet du message: Répondre en citant

C'est un vrai travail d'orfèvre [amen] [amen] [amen] !


Serge
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
Anonyme
Serial Posteur
Serial Posteur


Inscrit le: 26 Jan 2006
blank.gif


MessagePosté le: 27/01/2017 19:26    Sujet du message: Répondre en citant

Stunning work! [clap] [clap]
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
sebastian92
Serial Posteur
Serial Posteur


Inscrit le: 01 Sep 2015
france.gif

Localisation: Hauts de seine
Âge: 60 Scorpion

MessagePosté le: 27/01/2017 19:38    Sujet du message: Répondre en citant

It's great [clap]
In more you are equipped well !
very nice work.



Pourvu que ça vole, roule, flotte ! normalement j'ai tout bien fait pour…
Un bel avion est un avion qui vole bien ! Marcel Dassault
…………
Sebastian

Vends module émission 2.4 ghz pour Futaba, Hitec TZ-FM + 2 récepteurs corona 8 voies (contact en MP)
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé
bocorvin
Maniaco Posteur
Maniaco Posteur


Inscrit le: 17 Aoû 2015
netherlands.gif

Localisation: Hillegom
Âge: 77 Vierge

MessagePosté le: 27/01/2017 20:43    Sujet du message: Répondre en citant

Thank you for all the nice comments!

I'll pass them on to ADRI, he is the one who made this !!! Its all in the article, he worked several days on it, using all his creativity, skills and his very well equipped workshop.

But I am very pleased with it Very Happy Very Happy

Vincent.
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
bocorvin
Maniaco Posteur
Maniaco Posteur


Inscrit le: 17 Aoû 2015
netherlands.gif

Localisation: Hillegom
Âge: 77 Vierge

MessagePosté le: 01/02/2017 15:51    Sujet du message: Répondre en citant

Hello everyone,

Next is the painting of the heads, difficult to get it more or less right...
From my wife I borrowed acrylics, skin colour and burnt sienna. Nice thing is you can mix it on a plate and you can speed up the drying proces with a simple hair drier, so you can quickly find out if the colour is right.

first coat; left is bare sculpey, right has the base colour.




Next thing is adding shades

bit to much, correcting it again



Looks stil a bit too much, but I'll wait with changing that, till the moment the figures are complete with clothes etc.
Next thing is unknown to me. On this photo there is a very distinct black line which holds the cloth. It looks a bit temporarely, but nice to model it!

It starts at the nose and goes round the cockpit aperture.
I like to make holes with some heat, so I made from a pin a very small heat thing wrapped around my soldering iron to make all the small holes.

It took some time with needle and thread.





How farther I got in the nose, the more difficult it went Sad and the last three stitches were impossible.


I cheated a bit;

wrapped thread round, put thin superglue on it and cut away the half loops

Glued the half loops through the holes



Now the interior is almost finished, I closed the bottom with diacov



to be continued,

Vincent


Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
Christian
Serial Posteur
Serial Posteur


Inscrit le: 02 Mai 2006
france.gif

Localisation: Europe
Âge: 61 Verseau

MessagePosté le: 02/02/2017 20:38    Sujet du message: Répondre en citant

C'est vraiment magnifique [clap] [clap] [clap]

Le pilote c'est la tête à Vincent ?

Christian






Orlik en construction
Revenir en haut de page
Voir le profil de l'utilisateur Envoyer un message privé Envoyer un e-mail
Montrer les messages depuis:   
Poster un nouveau sujet   Répondre au sujet    RETROPLANE.net Index du Forum -> Constructions Métalliques - Stahlrohrkonstruktion Toutes les heures sont au format GMT + 1 Heure
Aller à la page Précédente
1, 2, 3, 4, 5, 6, 7, 8 Suivante
Page 4 sur 8

 
Sauter vers:  
Vous ne pouvez pas poster de nouveaux sujets dans ce forum
Vous ne pouvez pas répondre aux sujets dans ce forum
Vous ne pouvez pas éditer vos messages dans ce forum
Vous ne pouvez pas supprimer vos messages dans ce forum
Vous ne pouvez pas voter dans les sondages de ce forum
Vous ne pouvez pas joindre des fichiers
Vous pouvez télécharger des fichiers

Zone de Téléchargement du Forum et Site Retroplane


Images aléatoires album Retroplane, clic pour Agrandir

Forum en Flux RSS